Insulationbee ltd Shop! Buy your insulation materials online

Ceresit CT 17 Profi Ceresit CT 17 Profi is designed for priming substrates (walls, floors, ceilings) inside and outside buildings prior to fixing ceramic tiles, pouring floors, fixing floor lining, papering, puttying, painting, or fixing thermal insulation boards. The primer is solvent-free. Substrates primed with Ceresit CT 17 Profi (all kinds of plaster, concrete, screeds, primers with underfloor heating installations) are of lower absorbency, which prevents too rapid overdrying of adhesive mortars, flooring, putties and paints. Please speak to one of our friendly staff on 02038839057 Buy yours with us today at www.insulationbee.co.uk

Cekol GB-87 Cekol GB-87 is a preparation on the basis of water soluble acrylic resin used to prepare the substrate before application of thin-layer façade plasters on mineral substrates. After drying, it forms a white, coarse coat, resistant to water and alkaline agents. The coating does not inhibit the exchange of water vapour and gases with the environment. Cekol GB-87 improves the bonding uniformity, coat-to-substrate adhesiveness, and makes application easier. It can be used inside and outside buildings and is non-toxic and non-flammable. The primer is available in white colour. In order to obtain a required colour, the primer can be coloured with available pigments in the form of liquid concentrates or pastes. Please speak to one of our friendly staff on 02038839057 Buy yours with us today at www.insulationbee.co.uk  

CEKOL DL-80 CEKOL DL-80 is a water-borne, solvent-free, deeply penetrating emulsion used for priming absorbable gypsum, concrete and brick substrates under putty, leveling with self-leveling mortars, gluing ceramic tiles. Can be used inside and outside buildings. The CEKOL DL-80 emulsion can be used to protect plaster surfaces against moisture and weather conditions. Please speak to one of our friendly staff on 02038839057 Buy yours with us today at www.insulationbee.co.uk

WIM Primer  WIM Primer is a primer intended for priming and reinforcing the old and new absorbent substrates. Reduces absorption of plaster, plasterboard, anhydrite screeds and cellular concrete blocks. It strengthens the old, dusty surface and aligns the setting time of adhesives, fillers, leveling and self-leveling. Recommended before the floors and subfloors and mineral plasters. It can be used in heated floor constructions. For use indoors and outdoors. Depending on absorbency of the substrate. Average consumption of 0.05 – 0.2 kg per 1 m² Please speak to one of our friendly staff on 02038839057 Buy yours with us today at www.insulationbee.co.uk

WIM Strengthening-Primer WIM Strengthening-Primer is a deep penetrating primer intended for priming and reinforcing the old and new absorbent substrates. Reduces absorption of plaster, plasterboard, anhydrite screeds and cellular concrete blocks. It strengthens the old, dusty surface and aligns the setting time of adhesives, fillers, leveling and self-leveling. Recommended before the floors and subfloors and mineral plasters. It can be used in heated floor constructions. For use indoors and outdoors. Depending on absorbency of the substrate. Average consumption of 0.05 – 0.2 kg per 1 m². Please speak to one of our friendly staff on 02038839057 Buy yours with us today at www.insulationbee.co.uk

Ceresit CT 17  Ceresit CT 17 Profi is designed for priming substrates (walls, floors, ceilings) inside and outside buildings prior to fixing ceramic tiles, pouring floors, fixing floor lining, papering, puttying, painting, or fixing thermal insulation boards. The primer is solvent-free. Substrates primed with Ceresit CT 17 Profi (all kinds of plaster, concrete, screeds, primers with underfloor heating installations) are of lower absorbency, which prevents too rapid overdrying of adhesive mortars, flooring, putties and paints. consumption: from 0.1 to 0.5 l / m² (depending on the equality and absorbability of the substrate) it strengthens the surface reduces the absorbability of the substrate improves adhesion to the ground permeable makes it easier to apply subsequent layers, eg glues, putties, floors, paints Please speak to one of our friendly staff on 02038839057 Buy yours with us today at www.insulationbee.co.uk

Ceresit CT 17 Ceresit CT 17 Profi is designed for priming substrates (walls, floors, ceilings) inside and outside buildings prior to fixing ceramic tiles, pouring floors, fixing floor lining, papering, puttying, painting, or fixing thermal insulation boards. The primer is solvent-free. Substrates primed with Ceresit CT 17 Profi (all kinds of plaster, concrete, screeds, primers with underfloor heating installations) are of lower absorbency, which prevents too rapid overdrying of adhesive mortars, flooring, putties and paints. consumption: from 0.1 to 0.5 l / m² (depending on the equality and absorbability of the substrate) it strengthens the surface reduces the absorbability of the substrate improves adhesion to the ground permeable makes it easier to apply subsequent layers, eg glues, putties, floors, paints Please speak to one of our friendly staff on 02038839057 Buy yours with us today at www.insulationbee.co.uk

CEKOL DL-80 CEKOL DL-80 is a water-borne, solvent-free, deeply penetrating emulsion used for priming absorbable gypsum, concrete and brick substrates under putty, leveling with self-leveling mortars, gluing ceramic tiles. Can be used inside and outside buildings. The CEKOL DL-80 emulsion can be used to protect plaster surfaces against moisture and weather conditions. CEKOL DL-80 emulsion is non-toxic and non-flammable. Does not contain organic solvents. Strengthens substrates, seals them, increases adhesion of putty and adhesive mortars to the substrate and spout. Prevents harmful chemical reactions between gypsum and cement. With self-leveling screeds, it prevents the water from absorbing too quickly through the subfloor, improving flowability and reducing bubble formation. CEKOL DL-80 improves evenness in the application of mortars when plastering and leveling. Priming the plaster surface makes painting easier. After drying, a transparent, slightly shiny coating is formed on the sur...

 CEKOL DL-80 CEKOL DL-80 is a water-borne, solvent-free, deeply penetrating emulsion used for priming absorbable gypsum, concrete and brick substrates under putty, levelling with self-levelling mortars, gluing ceramic tiles. Can be used inside and outside buildings. The CEKOL DL-80 emulsion can be used to protect plaster surfaces against moisture and weather conditions. Please speak to one of our friendly staff on 02038839057 Buy yours with us today at www.insulationbee.co.uk

 Dulux Primer for Difficult Surfaces Dulux Primer for Difficult Surfaces is suitable for MDF, tiles, melamine and UPVC. It provides excellent adhesion on difficult interior and exterior surfaces. Apply 1 coat of Dulux Difficult Surface Primer with a brush or short pile roller. When fully dry, minimum 4 hours, apply an appropriate Dulux paint system. Coverage: Up to 10m2/litre Drying Time: Leave for 4-6 hours to dry. Coats: 1 Quick drying Step 1: Make sure the surface is clean (no dirt or grease) and dry. Step 2: Remove paint from the brush or roller with a cloth and then wash with water. Step 3: Store paint in dry conditions and protect from extreme temperatures. Buy yours with us today at www.insulationbee.co.uk

 Dulux Primer & Undercoat for Wood A Quick Dry primer and undercoat which is convenient to use. Suitable for most interior and exterior new or bare wood. Apply 1 coat with a brush to previously coated surfaces or 2 coats to bare surfaces. Leave 2 hours to dry between coats. When fully dry apply an appropriate Dulux paint system. Coverage: Up to 16m2/litre Drying Time: Leave 2 hours to dry Coats: 2 Quick drying Simple & easy surface preparation Step 1: Make sure the surface is clean (no dirt or grease) and dry. Step 2: Remove paint from the brush with a cloth and then wash with water. Step 3: Store paint in dry conditions and protect from extreme temperatures. Multiple colours available; to select a colour, please speak to one of our friendly staff on 02038839057 Buy yours with us today at www.insulationbee.co.uk

 Dulux Primer & Undercoat Multi Surface Dulux Primer & Undercoat for Multi Surfaces is suitable for interior or exterior wood, metal and masonry surfaces. Thanks to its Quick Dry formulation, it's easy and convenient to use. Please note that highly resinous wood or corroded metal will require a specialist primer Apply 1 coat with a brush to previously coated surfaces or 2 coats to bare surfaces. Leave 2 hours to dry between coats. When fully dry apply an appropriate Dulux paint system. Coverage: Up to 16m2/litre Drying Time: Leave 6 hours to dry Coats: 2 Quick drying Simple & easy surface preparation Step 1: Make sure the surface is clean (no dirt or grease) and dry. Step 2: Remove paint from the brush with a cloth and then wash with water. Step 3: Store paint in dry conditions and protect from extreme temperatures. Multiple colours available; to select a colour, please speak to one of our friendly staff on 02038839057 Buy yours with us today at www.insulationbee.co.uk...