Insulationbee ltd Shop! Buy your insulation materials online

Dulux Once Eggshell Dulux Once Eggshell has been specially formulated to give a perfect low sheen finish on interior and primed or painted wood or metal surfaces in just one coat. It does not require an undercoat. Dulux Once is also available in Emulsion, Gloss and Satinwood. Apply using a clean, good quality brush. Apply a thick even coat of paint taking care not to spread it too far. Failure to do so may require a second coat, particularly when painting over a darker colour with a lighter topcoat. Leave a minimum of 16 hours between coats. Finish: Eggshell Coverage: Up to 30m2 / litre Drying Time: 6 hours Coats: 1 One coat No undercoat required Step 1: Scrape: remove flaking or defective paint and sand down the surface to remove any sheen. Clean- make sure the surface is clean (no dirt or grease) and dry. Seal: if a bare surface, apply the appropriate Dulux Primer. Treat any knots in wood with suitable knotting solution. If the surface is damaged, repair using the appropriate Polyc

Dulux Once Gloss Dulux Once Gloss is a one coat gloss paint for interior wood and metal surfaces. Apply using a clean, good quality brush. Apply a thick even coat of paint taking care not to spread it too far. Failure to do so may require a second coat, particularly when painting over a darker colour with a lighter topcoat. Leave a minimum of 16 hours between coats. Whilst leading edge technology has been used in the development of this product, the nature of solvent based paints means that they will discolour over time. The rate of discolouration is faster in areas with low natural or UV light. For long lasting whiteness we recommend the use of a water based formulation , available in the Dulux Quick Dry range Finish: Gloss Coverage: Up to 12m2/litre Drying Time: Leave for 16 hours to dry. Newly painted doors and windows should not be closed and radiators should not be heated until paint is fully dry. Coats: 1 One coat High gloss finish Step 1: Remove flaking or defective paint and

 Dulux Once Satinwood Dulux Once Satinwood has been specially formulated to give a perfect satin finish on interior primed or painted wood or metal surfaces in just one coat. It does not require an undercoat. Apply using a clean, good quality brush. Apply a thick even coat of paint taking care not to spread it too far. Failure to do so may require a second coat, particularly when painting over a darker colour with a lighter topcoat. Leave a minimum of 16 hours between coats. Finish: Satin Coverage: Up to 12m2/litre Drying Time: 16 hours Coats: 1 One coat No undercoat required Step 1: Remove flaking or defective paint and sand down the surface to remove any sheen. Refer to health, safety and environmental information. Make sure the surface is clean (no dirt or grease) and dry. Step 2: For best results, scrape off excess paint from the brush and clean with Polycell Brush Cleaner. Step 3: Store paint in dry conditions and protect from extreme temperatures Multiple colours available; to