Insulationbee ltd Shop! Buy your insulation materials online

CEKOL GS-250  CEKOL GS-250 is a product designed for dust-free application of the finishing with “wet” treatment on walls and ceilings inside buildings on all mineral substrates. Wet treatment significantly reduces the amount of dust during the work carried out. The product is also designed for classical treatment by grinding.Cekol GS-250 is skim finish plaster for common backgrounds; it can be used as part of a two-coat plaster system or on plasterboard.  Its flexibility also makes it an ideal choice for small repair jobs and patching. It is a compound of synthetic gypsum, mineral fillers and modifiers. LAYER THICKNESS 1-10 MM FOR WET TREATMENT FOR MANUAL AND MACHINE APPLICATION Please speak to one of our friendly staff on 02038839057 Buy yours with us today at www.insulationbee.co.uk

 Dulux Primer & Undercoat Multi Surface Dulux Primer & Undercoat for Multi Surfaces is suitable for interior or exterior wood, metal and masonry surfaces. Thanks to its Quick Dry formulation, it's easy and convenient to use. Please note that highly resinous wood or corroded metal will require a specialist primer Apply 1 coat with a brush to previously coated surfaces or 2 coats to bare surfaces. Leave 2 hours to dry between coats. When fully dry apply an appropriate Dulux paint system. Coverage: Up to 16m2/litre Drying Time: Leave 6 hours to dry Coats: 2 Quick drying Simple & easy surface preparation Step 1: Make sure the surface is clean (no dirt or grease) and dry. Step 2: Remove paint from the brush with a cloth and then wash with water. Step 3: Store paint in dry conditions and protect from extreme temperatures. Multiple colours available; to select a colour, please speak to one of our friendly staff on 02038839057 Buy yours with us today at www.insulationbee.co.uk...

Weathershield Multi-Surface Fungicidal Wash Weathershield Multi-Surface Fungicidal Wash from Dulux is suitable for brush application only to new or previously painted interior or exterior wood or masonry surfaces contaminated with mould, algae, fungi or lichen.   Apply the solution to all affected areas with a brush. Leave for 24 hours and then thoroughly rinse and scrub with clean water to remove residues and dead growth. Failure to remove residues may result in discolouration of subsequently applied coatings. Repeat the process if necessary. Do not apply in wet weather. Badly affected areas, or if lichen is present may require the use of high pressure water-hosing to remove all organic growth completely. When the surface is fully dry, apply the appropriate Dulux or Weathershield finishing system. TIP: apply only in dry conditions, above 10°C and when bad weather is not forecast. Causes serious eye irritation. Causes skin irritation. Harmful to aquatic life with long lasting eff...

Weathershield Multi-Surface Quick Dry Satin Weathershield Multi Surface Quick Dry Satin from Dulux is a water-based finish that can be used on exterior wood, metal and uPVC and guarantees 6 year weather protection. The weatherproof paint film is mould resistant to minimise staining and flexible to prevent cracking. This keeps your paintwork looking better for longer compared to conventional Dulux paints.   Before using this product ensure all surfaces to be painted are clean (no dirt, grease, rust or flaking paint) and dry. Areas affected by mould, algae or fungi should be treated with an appropriate fungicidal wash. Sand down the surface to remove any sheen. Refer to health and safety information. Metal Remove rust using Hammerite Rust Remover. On new galvanized surfaces, allow to weather for six months before application. New bare wood To ensure 6 year weather protection is achieved, prepare bare wood with Weathershield Exterior Preservative Primer+ (BP), wiping off any excess....