Insulationbee ltd Shop! Buy your insulation materials online

Ceresit CT 85 mortar Ceresit CT 85 mortar is used for insulating external walls of buildings using the light-wet method using foamed polystyrene boards. It is a component of the complex thermal insulation system (ETICS) of external walls of Ceresit Ceretherm buildings. CT 85 mortar is used both for fixing foamed polystyrene boards and for making a reinforced protective layer when insulating newly erected buildings as well as those undergoing thermorenovation. Ceresit CT 85 through the use of a specially selected combination of fibers increases the resistance of the insulation system to mechanical damage and resistance to cracking. Please speak to one of our friendly staff on 02038839057 Buy yours with us today at www.insulationbee.co.uk

WIM Grout WIM Grout is a ​​flexible mortar for pointing joints with a width of 0 to 15 mm. It’s also ideal for pointing all types of ceramic wall and floor tiles, stoneware, clinker, and natural stone. Ideal for grouting exterior facades, balconies, terraces, tiles laid in wet and wet rooms (e.g. bathrooms, kitchens, shower / shower cabins and for use in rooms with floor heating installed). Please speak to one of our friendly staff on 02038839057 Buy yours with us today at www.insulationbee.co.uk

 Ceresit CM 12 Plus Ceresit CM 12 Plus adhesive mortar is designed for laying gres and other ceramic, cement and natural stone tiles (discoloration-proof), indoors and outdoors. Ceresit CM 12 mortar can be used in areas exposed to water penetration and on heated floors. As a medium-bed mortar, CM 12 can be applied to repair and level surfaces with depressions of up to 8 mm before laying tiles. Flexible floor adhesive with plastic consistency Excellent working parameters+D1 For wet areas For underfloor heating For heavy traffic areas On non-deforming and sealed substrates For indoor or outdoor For ceramic and gres tiles Please speak to one of our friendly staff on 02038839057 Buy yours with us today at www.insulationbee.co.uk

Ceresit CM 12 Ceresit CM 12 adhesive mortar is designed for laying gres and other ceramic, cement and natural stone tiles (discoloration-proof), indoors and outdoors. Ceresit CM 12 mortar can be used in areas exposed to water penetration and on heated floors. As a medium-bed mortar, CM 12 can be applied to repair and level surfaces with depressions of up to 8 mm before laying tiles. Walkable and groutable after 3 hours For indoor and outdoor For ceramic and gres tiles up to 80 cm on one side Please speak to one of our friendly staff on 02038839057 Buy yours with us today at www.insulationbee.co.uk

Ceresit CM 11 PLUS Ceresit CM 11 PLUS adhesive mortar is designed for laying gres and other ceramic, cement and natural stone tiles (colour-fast), indoors and outdoors. Thanks to a special combination of fillers, the new mortar CM 11 PLUS is easy to apply, therefore making the progress of work faster. For larger tiles up to 0.25 m² and 60 cm side-length Extra ANTI-SLIP with larger tiles Grouting on the wall after only 8h (gres tiles) Low-emission certified ”EC1 PLUS®” Easy mixing and spreading For use on waterproofed surfaces For indoor use, also in wet rooms, outdoor use possible in some cases (domestic area) For gres and ceramic tiles Please speak to one of our friendly staff on 02038839057 Buy yours with us today at www.insulationbee.co.uk

Ceresit CM 11 Ceresit CM 11 mortar is suitable for ceramic (glazed, terracotta), porcelain, cement and stone tiles (except marble), on non-deformable substrates such as concrete, cement screed, cement and cement-lime plaster. It can be used inside buildings. In the case of other surfaces, on deformable substrates, such as: plasterboards, chipboards, floors, balconies, terraces, use appropriate CM adhesive mortars for interior ceramic and porcelain tiles stable on vertical surfaces – no runoff for dry and damp rooms increased operating parameters Please speak to one of our friendly staff on 02038839057 Buy yours with us today at www.insulationbee.co.uk

CEKOL C-40 CEKOL C-40 is an excellent material for pointing of cardboard-gypsum panels without a strengthening tape. CEKOL C-40 may also be used for filling of scratches and cracks on the wall and ceiling surfaces. CEKOL C-40 is a dry mixture of high quality gypsum, fillers and modifying substances. It is used for pointing of cardboard-gypsum and gypsum panels. CEKOL C-40 is non-toxic in application and use. It is easy to use, with very good functional qualities. With a wide range of additives, CEKOL C-40 is a product of enhanced strength and elasticity, which allows the use of tape. CEKOL C-40 should be used only inside buildings. Ground, after full setting, with properly selected abrasive paper or polycarbonate mesh, gives an ideally smooth surface. Please speak to one of our friendly staff on 02038839057 Buy yours with us today at www.insulationbee.co.uk

 CEKOL C-40 CEKOL C-40 is an excellent material for pointing of cardboard-gypsum panels without a strengthening tape. CEKOL C-40 may also be used for filling of scratches and cracks on the wall and ceiling surfaces. CEKOL C-40 is a dry mixture of high quality gypsum, fillers and modifying substances. It is used for pointing of cardboard-gypsum and gypsum panels. CEKOL C-40 is non-toxic in application and use. It is easy to use, with very good functional qualities. With a wide range of additives, CEKOL C-40 is a product of enhanced strength and elasticity, which allows the use of tape. CEKOL C-40 should be used only inside buildings. Ground, after full setting, with properly selected abrasive paper or polycarbonate mesh, gives an ideally smooth surface. Please speak to one of our friendly staff on 02038839057 Buy yours with us today at www.insulationbee.co.uk

 K Mix GP Mortar K Mix GP Mortar is a general purpose mortar designed for laying blocks or bricks. It can also be used as a scratch coat plaster for internal and external work, as a bedding for pavia and as a rubbed up finish suitable for external painting. The K Mix product range incorporates a variety of dry bagged construction mortars that require only the addition of water and mixing time. The mortars can be used for block and brick laying, scratch coats, bedding for pavia and grout for pavia. K Mix Construction Mortars are manufactured to ISO 9001, and conform to BS EN 998-2. The K Mix range are factory-produced to provide excellent consistency and colour uniformity. The K-Mix products contain air entraining agents which help provide excellent workability. K Mix GP mortar can be used to improve the air-tightness and the sound insulation of concrete block walls. Dry bagged Excellent consistency High strength general purpose mortar 5 minute mixing time Manufactured to ISO 9001...