Insulationbee ltd Shop! Buy your insulation materials online

Dulux Once Eggshell Dulux Once Eggshell has been specially formulated to give a perfect low sheen finish on interior and primed or painted wood or metal surfaces in just one coat. It does not require an undercoat. Dulux Once is also available in Emulsion, Gloss and Satinwood. Apply using a clean, good quality brush. Apply a thick even coat of paint taking care not to spread it too far. Failure to do so may require a second coat, particularly when painting over a darker colour with a lighter topcoat. Leave a minimum of 16 hours between coats. Finish: Eggshell Coverage: Up to 30m2 / litre Drying Time: 6 hours Coats: 1 One coat No undercoat required Step 1: Scrape: remove flaking or defective paint and sand down the surface to remove any sheen. Clean- make sure the surface is clean (no dirt or grease) and dry. Seal: if a bare surface, apply the appropriate Dulux Primer. Treat any knots in wood with suitable knotting solution. If the surface is damaged, repair using the appropriate Polyc

Dulux Quick Dry Gloss Dulux Quick Dry Gloss is a beautiful gloss paint . It is self-undercoating, wipeable, non-yellowing and suitable for use on interior wood and metal (including heated surfaces). Thanks to its Quick Dry, low odour formulation it is both convenient and pleasant to use. Apply 2 coats with a brush, leave at least 6 hours between coats, longer when cold and damp. TIP: if the colour change is strong, more coats may be required. Finish: Gloss Coverage: Up to 16m2/litre Drying Time: 6 hours Coats: 2 Quick drying Water based, low odour Stays white Step 1: Make sure the surface is clean (no dirt or grease) and dry. When painting radiators, make sure that they are cold. Step 2: For best results, scrape off excess paint from the brush and clean with water Step 3: Store paint in dry conditions and protect from extreme temperatures. Multiple colours available; to select a colour, please speak to one of our friendly staff on 02038839057 Buy yours with us today at www.insulationb

Dulux Cupboard Paint Dulux Cupboard Paint is 10 times tougher than our conventional water based satin paints, giving you a durable, hard wearing finish for cupboards. It is self-undercoating and quick drying. Apply 1 or 2 coats with a brush. Apply liberally and evenly to avoid runs and sags. Leave 6 hours between coats, sanding down lightly in between. Do not apply in very damp or humid conditions and when room temperatures are below 10°C. Not suitable for use on radiators or other heated surfaces. TIP: If the colour change is strong, more coats may be required. Finish: Satin Coverage: Up to 16m2/litre Drying Time: Leave 6 hours to dry. Coats: 2 Quick drying No undercoat required Hardwearing Step 1: Make sure the surface is clean (free from dirt, mould and grease) and dry. Step 2: Remove paint from the brush with a cloth and then wash with water. Step 3: Store paint in dry conditions and protect from extreme temperatures. Multiple colours available; to select a colour, please speak t

 Dulux Tile Paint Dulux Tile Paint is 10 times tougher and 10 times more shower resistant than our conventional water based satin paints . It is self-undercoating and quick drying. Apply 1 or 2 coats with a brush. Apply liberally and evenly to avoid runs and sags. Leave 4 hours between coats. Do not apply in very damp or humid conditions, in the inside of shower areas and when room temperatures are below 10°C. Not suitable for use on radiators or other heated surfaces. TIP: if the colour change is strong, more coats may be required. Finish: Gloss Coverage: Up to 18m2/litre Drying Time: 4 hours to dry; 24 hours before exposing to water. Coats: 2 Quick drying No undercoat required Hardwearing Step 1: Make sure the surface is clean (free from dirt, mould, grease and grout residue) and dry. Remove any flaking or defective material. Using abrasive paper, thoroughly sand to scuff the tile surface. Refer to health, safety and environmental information. Step 2: Remove paint from the brush or

Dulux Sealer for Plaster Dulux Sealer for Plaster is Ideal for priming bare plaster surfaces, plasterboard and powdery surfaces. It penetrates the surface, sealing it ready for painting. Initially appears blue on application to ensure an even coverage is achieved but turns clear once dry. Apply 1 coat with a brush. A short pile roller may also be used for larger areas that have a smooth surface. This product appears blue in colour when first applied, to help ensure an even coverage, but will become virtually clear on drying. When the sealer is fully dry, apply an appropriate Dulux paint system. Do not rub down the sealer before overcoating as this will reduce its sealing properties. Coverage: Up to 18m2/litre Drying Time: 18-24 hours. Coats: 1 One coat Step 1: Make sure the surface is clean (no dirt or grease) and dry. Step 2: Remove paint from the brush or roller with a cloth and then wash with water. Step 3: Store paint in dry conditions and protect from extreme temperatures. Buy yo

 Dulux Professional Undercoat A Undercoat with superb hiding power, good cling to sharp edges and excellent levelling properties. It can be applied on interior or exterior wood and metal surfaces. Apply 1 coat of Dulux Professional Undercoat with a brush, followed by 1 or 2 coats Dulux Professional Liquid Gloss. Where a second coat is required, leave at least 16 hours between coats. TIP: if the colour change is strong, more coats may be required. Coverage: Up to 16m2/litre Drying Time: 16 hours Coats: 1 Even base for top coat Step 1: Make sure the surface is clean (no dirt or grease) and dry. Step 2: For best results, scrape off excess paint from the brush and clean with Polycell Brush Cleaner. Step 3: Store paint in dry conditions and protect from extreme temperatures. TIP: after use firmly secure the lid. To preserve the quality, briefly turn the can upside down and return to upright position to store. Buy yours with us today at www.insulationbee.co.uk

 Dulux Primer for Difficult Surfaces Dulux Primer for Difficult Surfaces is suitable for MDF, tiles, melamine and UPVC. It provides excellent adhesion on difficult interior and exterior surfaces. Apply 1 coat of Dulux Difficult Surface Primer with a brush or short pile roller. When fully dry, minimum 4 hours, apply an appropriate Dulux paint system. Coverage: Up to 10m2/litre Drying Time: Leave for 4-6 hours to dry. Coats: 1 Quick drying Step 1: Make sure the surface is clean (no dirt or grease) and dry. Step 2: Remove paint from the brush or roller with a cloth and then wash with water. Step 3: Store paint in dry conditions and protect from extreme temperatures. Buy yours with us today at www.insulationbee.co.uk

 Dulux Primer & Undercoat for Wood A Quick Dry primer and undercoat which is convenient to use. Suitable for most interior and exterior new or bare wood. Apply 1 coat with a brush to previously coated surfaces or 2 coats to bare surfaces. Leave 2 hours to dry between coats. When fully dry apply an appropriate Dulux paint system. Coverage: Up to 16m2/litre Drying Time: Leave 2 hours to dry Coats: 2 Quick drying Simple & easy surface preparation Step 1: Make sure the surface is clean (no dirt or grease) and dry. Step 2: Remove paint from the brush with a cloth and then wash with water. Step 3: Store paint in dry conditions and protect from extreme temperatures. Multiple colours available; to select a colour, please speak to one of our friendly staff on 02038839057 Buy yours with us today at www.insulationbee.co.uk

 Dulux Primer & Undercoat Multi Surface Dulux Primer & Undercoat for Multi Surfaces is suitable for interior or exterior wood, metal and masonry surfaces. Thanks to its Quick Dry formulation, it's easy and convenient to use. Please note that highly resinous wood or corroded metal will require a specialist primer Apply 1 coat with a brush to previously coated surfaces or 2 coats to bare surfaces. Leave 2 hours to dry between coats. When fully dry apply an appropriate Dulux paint system. Coverage: Up to 16m2/litre Drying Time: Leave 6 hours to dry Coats: 2 Quick drying Simple & easy surface preparation Step 1: Make sure the surface is clean (no dirt or grease) and dry. Step 2: Remove paint from the brush with a cloth and then wash with water. Step 3: Store paint in dry conditions and protect from extreme temperatures. Multiple colours available; to select a colour, please speak to one of our friendly staff on 02038839057 Buy yours with us today at www.insulationbee.co.uk

Dulux colour mixing Satinwood Dulux colour mixing Satinwood paint gives interior wood and metal a hard-wearing, subtle sheen finish . Ideal for adding a modern effect to your home. Stir thoroughly before use to ensure the paint is completely mixed. Apply 2 coats of Dulux colour mixing Satinwood using a good quality synthetic brush. Allow 6 hours between coats, longer when cold and damp. Where a strong colour change is involved, more coats may be required. Newly painted doors should not be closed (tightly) until paint is fully dry. Finish: Satin Coverage: Up to 16m2 / litre Drying Time: 6 hours Coats: 2 Water based, low odour Quick drying Step 1: Remove any flaking or defective paint. Sand down to remove any sheen. Ensure the surface is clean and dry. Treat any knots in wood with a suitable knotting solution. Apply an appropriate Dulux primer to bare surfaces. Surface defects should be repaired using the appropriate Polycell products. Step 2: After use, remove as much paint as possible

 Dulux Quick Dry Satinwood Dulux Quick Dry Satinwood creates a mid-sheen satin finish , providing a subtle, attractive alternative to gloss. It is self-undercoating, wipeable, non-yellowing and suitable for use on interior wood and metal. Thanks to its Quick Dry, low odour formulation, it's both convenient and pleasant to use. Apply 2 coats with a brush, leave at least 6 hours between coats, longer when cold and damp. TIP: if the colour change is strong, more coats may be required. Finish: Satin Coverage: Up to 16m2/litre Drying Time: Leave 6 hours to dry. Newly painted doors and windows should not be closed until paint is fully dry. Coats: 2 Water based, low odour Quick drying Non drip Stays white Step 1: Make sure the surface is clean (no dirt or grease) and dry. When painting radiators, make sure that they are cold. Step 2: Remove paint from the brush with a cloth and then wash with water. Step 3: Store paint in dry conditions and protect from extreme temperatures. Multiple col

 Dulux colour mixing Eggshell Dulux colour mixing Eggshell paint gives interior wood and metal (including heated surfaces) a durable, low sheen finish . Ideal for delivering a contemporary look to a modern or period property Stir thoroughly before use to ensure the paint is completely mixed. Apply 2 coats of Dulux colour mixing Eggshell using a good quality synthetic brush. Allow 6 hours between coats, longer when cold and damp. Where a strong colour change is involved, more coats may be required. Newly painted doors should not be closed (tightly) until paint is fully dry. Finish: Eggshell Coverage: Up to 16m2 / litre Drying Time: 6 hours Coats: 2 Long lasting protection Quick drying Water based, low odour Step 1: Remove any flaking or defective paint. Sand down to remove any sheen. ensure the surface is clean and dry. Treat any knots in wood with a suitable knotting solution. Apply an appropriate Dulux primer to bare surfaces. Surface defects should be repaired using the appropriate

Dulux Quick Dry Eggshell Dulux Quick Dry Eggshell creates a low-sheen finish . It is self-undercoating, wipeable and suitable for use on interior wood and metal. Apply 1 or 2 coats with a brush, leave at least 6 hours between coats. Finish: Eggshell Coverage: 16m2/litre Drying Time: 6 hours Coats: 2 Quick drying Water based, low odour Stays white Step 1: Make sure the surface is clean (no dirt or grease) and dry. When painting radiators, make sure that they are cold. Step 2: For best results, scrape off excess paint from the brush and clean with water. Step 3: Store paint in dry conditions and protect from extreme temperatures. Multiple colours available; to select a colour, please speak to one of our friendly staff on 02038839057 Buy yours with us today at www.insulationbee.co.uk