Insulationbee ltd Shop! Buy your insulation materials online

Ceresit CT 49 Silix XD Ceresit CT 49 Silix XD® nano-silicone paint is equipped in selected modified silicone and polysiloxane resins together with special fillers and pigments. Thanks to extremely high hydrophobia of the coat surface, reached by use of PTFE additives the “pearl” effect appears – inmigration of water and dirt is strongly limited. Nevertheless the coat is highly permeable to water vapour.  CT 49 Silix XD® extends the aesthetic effect and durability of the coated surface.CT 49 Silix XD® is used outdoor and indoor, especially suggested for protecting of coated areas against weathering (e.g. sour rain), biological corrosion and in cases where high durability and dirt-resistance is required. It can be applied on the mineral substrates (concrete, cement plasters, lime–cement plasters and lime plasters) that have never been painted before.This paint can be used for painting Ceresit: CT 35 and CT 137 mineral plasters, Ceresit: CT 60, CT 63, CT 64 acrylic plasters, Ceresit:...

Ceresit CT 48 Ceresit CT 48 is used for protecting façades, concrete constructions, interiors. It can be applied on the mineral substrates (concrete, cement plasters, lime–cement plasters and lime plasters). This paint can be used for painting Ceresit: CT 34, CT 35 and CT 137 mineral plasters, Ceresit: CT 60, CT 63, CT 64 acrylic plasters, Ceresit: CT 72, CT 73 silicate plasters, Ceresit CT 174, CT 175 silicate-silicone plasters as well as silicone plasters Ceresit: CT 74, CT 75 applied on traditional substrates and within Ceresit ETICS with the application of EPS-boards The structure of the coating ensures fast moisture evaporation from the substrate and at the same time creates an efficient protection against the substrate moisture and humidity. The binder used in the paint CT 48 causes a pearl like effect of water after wetting the coat. It is highly recommended to use CT 48 in historical objects, on the renovation and aerated plasters as well as on all the surfaces where aesthetic...

Ceresit CT 174 Ceresit CT 174 combines good points of silicate plaster and silicone plaster. It is vapour permeable, of low absorbability and dirt resistant. CT 174 is used for making thin-layer plasters on concrete substrates, traditional plasters, gypsum substrates and chipboards, gypsum cardboards, etc. We recommend the application of the plaster CT 174 as façade plaster within a complex system of warming walls of outside buildings Ceresit Ceretherm ETICS with the application of EPS-boards and mineral wool. In case of intensive dark colours, the material application should be limited to small areas, e.g. architectural details. Plaster CT 174 is protected form biological paralyses, e.g. fungus, mould and algae. Please speak to one of our friendly staff on 02038839057 Buy yours with us today at www.insulationbee.co.uk

Ceresit CT137 Ceresit CT137 is used for making thin layer plasters on concrete substrates, traditional plasters, gypsum substrates and gypsum cardboards, gypsum-fibre boards, etc. We recommend the application of the plaster CT137 as facade plaster within Ceresit ETICS and EPS-boards or facade mineral wool boards. The plaster CT137 is manufactured in several colours to be applied as the final layer of the external wall as well as in the option to be painted,e.g. with Ceresit CT54 silicate paint or Ceresit CT48 silicone paint and Ceresit CT42/ CT44 acrylic paints (in case of applying Ceresit Ceretherm Wool systems). Please speak to one of our friendly staff on 02038839057 Buy yours with us today at www.insulationbee.co.uk

Ceresit CT 177 Ceresit CT 177 is used for applying decorative colourful plasters to traditional plasters, concrete substrates, gypsum substrates and chipboards, gypsum cardboards, etc. Transparent silicone-acrylic resins are the binder and coloured quartz gravels size 1.0-1.6 mm or 1.4-2.0 mm which are the fillers. This material is designed for applying with a metal long float. When it is set, the colourful plaster is obtained. The properties of the material allow for bridging the existing scratches in the substrate. Please speak to one of our friendly staff on 02038839057 Buy yours with us today at www.insulationbee.co.uk

Ceresit CT 325 Ceresit CT 325 is a reinforcing mesh for embedding into reinforcing mortars for Ceresit External Thermal Insulation Composite Systems (ETICS). For façades or pedestals exposed to higher mechanical loads, it is preferred to use CT 325 in two layers or use higher density mesh of 330 g/m2. Please speak to one of our friendly staff on 02038839057 Buy yours with us today at www.insulationbee.co.uk

Ceresit CT315 Ceresit CT315 Styrofoam boards are an excellent insulation material for jointless insulation systems for external walls of buildings (light-wet method) or as an insulation and construction element in glued sandwich panels. High resistance to tearing and shearing of panels with low weight allows safe insulation for all types of thin-layer plasters: incl. mineral, acrylic or silicate. The highest quality of our products is used in residential and industrial construction, in the implementation of buildings erected with modern technologies. Please speak to one of our friendly staff on 02038839057 Buy yours with us today at www.insulationbee.co.uk

Ceresit ZU Ceresit ZU mortar is used for insulation of external walls of buildings by the light-wet method with the use of foamed polystyrene boards. Is a component of complex external wall insulation systems (ETICS) of Ceresit Ceretherm buildings. Ceresit ZU mortar is used both for fixing foamed polystyrene boards and for making a reinforced protective layer when insulating newly erected buildings as well as those undergoing thermorenovation. Please speak to one of our friendly staff on 02038839057 Buy yours with us today at www.insulationbee.co.uk

Ceresit CX 10 Ceresit CX 10 successfully enables fixing and gluing of materials such as cellular concrete blocks, wood, OSB boards, plasterboards, foamed polystyrene elements, bituminous coatings, glass, galvanized sheet, polyester coated sheet and others. CX 10 successfully replaces traditional cement masonry mortars when making partition walls. It does not require the use of electricity, water or specialized equipment. At the same time, it has much better thermal insulation properties than traditional cement mortars. The adhesive is ready for use immediately after shaking the contents of the can. Ceresit CX 10 provides a precise and strong connection after just 2 hours. It guarantees work at temperatures from + 5 ° C and high humidity. Ceresit CX 10 can be used indoors and outdoors, both on horizontal and vertical surfaces. Please speak to one of our friendly staff on 02038839057 Buy yours with us today at www.insulationbee.co.uk

Ceresit CT 87 mortar Ceresit CT 87 mortar is used for insulating external walls of buildings by the light-wet method with the use of foamed polystyrene boards or facade panels made of mineral wool. It is a component of jointless insulation systems for external walls of Ceresit Ceretherm buildings. CT 87 mortar is used to make a protective reinforced layer when insulating newly erected buildings as well as those undergoing thermorenovation, and to fix facade thermal insulation boards. Ceresit CT 87 is additionally reinforced with fibers, and thus even more resistant to scratches and cracks. The use of CT 87 (color, surface and organic modifiers) allows it to skip the process of preparing its surface by priming with primers before applying any Ceresit plasters. The content of special light fillers gives the mortar a more plastic, light and homogeneous consistency, it is easier to mix, apply and spread, while increasing the mortar efficiency. Please speak to one of our friendly staff...

Ceresit CT 84 polyurethane adhesive Ceresit CT 84 polyurethane adhesive is used for fixing expanded polystyrene boards in complex Ceresit Ceretherm systems for insulation of external walls of buildings (ETICS). Ceresit CT 84 is used for fixing foamed polystyrene boards when insulating newly erected buildings as well as those undergoing thermorenovation. After approx. 2 hours since application, foamed polystyrene boards can be sanded, doweled, and then made with a mesh reinforced layer using Ceresit CT 85, CT 87 or ZU mortar. Ceresit CT 84 polyurethane adhesive is also used for fixing materials such as EPS and XPS foam and hard mineral wool to substrates such as: wood, OSB, glass, bitumen, ceramic brick, concrete, coated and galvanized sheet, dry cellular concrete and after exposure to water, gypsum plasterboard and for layered bonding of foamed polystyrene boards and mineral wool under normal and reduced temperatures, also in thermal insulation systems. Please speak to one of our f...

Ceresit CT 83 Ceresit CT 83 mortar is used for gluing foamed polystyrene boards as part of a complex insulation system for external walls of buildings (ETICS) by the light-wet method in Ceresit Ceretherm systems. It is suitable for both newly constructed and thermally renovated buildings. The boards glued with mortar require additional fixing with mechanical connectors, i.e. with appropriate plastic expansion pins. To make a layer reinforced with fiberglass mesh on foamed polystyrene boards, Ceresit CT 85 or CT 87 mortar should be used. In case of insulation of walls with mineral wool facade panels, Ceresit CT 190, CT 180 or CT 87 mortar should be used. highly adhesive to mineral substrates and polystyrene very good working parameters resistant to weather conditions the possibility of machine application Please speak to one of our friendly staff on 02038839057 Buy yours with us today at www.insulationbee.co.uk

Ceresit CT 17 Profi Ceresit CT 17 Profi is designed for priming substrates (walls, floors, ceilings) inside and outside buildings prior to fixing ceramic tiles, pouring floors, fixing floor lining, papering, puttying, painting, or fixing thermal insulation boards. The primer is solvent-free. Substrates primed with Ceresit CT 17 Profi (all kinds of plaster, concrete, screeds, primers with underfloor heating installations) are of lower absorbency, which prevents too rapid overdrying of adhesive mortars, flooring, putties and paints. Please speak to one of our friendly staff on 02038839057 Buy yours with us today at www.insulationbee.co.uk

Ceresit CT 16 Ceresit CT 16 facilitates the application of thin-layer plasters and renderings inside and outside the buildings. It is recommended for priming the armoured layers within Ceresit Ceretherm ETICS (External Thermal Insulation Composite Systems) and traditional plasters. The paint CT 16 can be applied to the surfaces of chipboards, gypsum cardboards, gypsum plasters, all types of concrete and strong paint coats. Priming the substrate with the paint CT 16 considerably decreases its absorption, which prevents from too fast drying of the applied products. The fine aggregates included in CT 16 make the primed surfaces rough and scratch resistant. As the surface is expanded, it increases the adhesion of the plasters, putties and paints. This product has strong coating properties and makes the substrate efficiently homogeneous, thus preventing any formation of stains on the coloured acrylic, mineral and silicone plasters. Please speak to one of our friendly staff on 02038839057 ...

Ceresit TS 100 Cleaner Ceresit TS 100 Cleaner is used for: removal of uncured polyurethane foam, removing dirt from the inside of the gun (only possible with non-hardened foam), cleaning the gun housing and barrel from the remains of fresh foam, degreasing surfaces during substrate preparation before using polyurethanes and silicones Ceresit TS 100 Cleaner is not suitable for removing hardened foam. The cleaning agent can damage painted or painted surfaces, fabrics or plastic. Avoid spraying on clean surfaces. Strong solvent! Please speak to one of our friendly staff on 02038839057 Buy yours with us today at www.insulationbee.co.uk

Ceresit WHITETEQ foam  Ceresit WHITETEQ foam is a White assembly foam with 4 x more compact structure, optimal low pressure, ultra soundproofing and maximum durability and is ideal for: • installation of window frames • installation of door frames • installation of roller shutter boxes, cabinets and installation, etc. • filling holes in roof constructions and in insulation materials • filling cavities around pipes and many others. Please speak to one of our friendly staff on 02038839057 Buy yours with us today at www.insulationbee.co.uk

 Ceresit CX 10 Ceresit CX 10 successfully enables fixing and gluing of materials such as cellular concrete blocks, wood, OSB boards, plasterboards, foamed polystyrene elements, bituminous coatings, glass, galvanized sheet, polyester coated sheet and others. CX 10 successfully replaces traditional cement masonry mortars when making partition walls. It does not require the use of electricity, water or specialized equipment. At the same time, it has much better thermal insulation properties than traditional cement mortars. The adhesive is ready for use immediately after shaking the contents of the can. Ceresit CX 10 provides a precise and strong connection after just 2 hours. It guarantees work at temperatures from + 5 ° C and high humidity. Ceresit CX 10 can be used indoors and outdoors, both on horizontal and vertical surfaces. Please speak to one of our friendly staff on 02038839057 Buy yours with us today at www.insulationbee.co.uk

Ceresit CT 84  Ceresit CT 84 polyurethane adhesive is used for fixing expanded polystyrene boards in complex Ceresit Ceretherm systems for insulation of external walls of buildings (ETICS). Ceresit CT 84 is used for fixing foamed polystyrene boards when insulating newly erected buildings as well as those undergoing thermorenovation.  After approx. 2 hours since application, foamed polystyrene boards can be sanded, doweled, and then made with a mesh reinforced layer using Ceresit CT 85, CT 87 or ZU mortar. Ceresit CT 84 polyurethane adhesive is also used for fixing materials such as EPS and XPS foam and hard mineral wool to substrates such as: wood, OSB, glass, bitumen, ceramic brick, concrete, coated and galvanized sheet, dry cellular concrete and after exposure to water, gypsum plasterboard and for layered bonding of foamed polystyrene boards and mineral wool under normal and reduced temperatures, also in thermal insulation systems. Please speak to one of our friendly sta...

 Ceresit CS9 white sanitary sealant Ceresit CS9 white sanitary sealant is ideal for: kitchens and bathrooms durable – resistant to cleaning agents protected from fungi and mold permanently elastic resistant to weather conditions has PZH approval for contact with drinking water Please speak to one of our friendly staff on 02038839057 Buy yours with us today at www.insulationbee.co.uk

Ceresit CS7 acrylic Ceresit CS7 acrylic sealant is ideal for: adhesion to porous substrates permanently elastic-plastic painted waterproof resistant to ageing Please speak to one of our friendly staff on 02038839057 Buy yours with us today at www.insulationbee.co.uk