Insulationbee ltd Shop! Buy your insulation materials online

Ceresit ZU Ceresit ZU mortar is used for insulation of external walls of buildings by the light-wet method with the use of foamed polystyrene boards. Is a component of complex external wall insulation systems (ETICS) of Ceresit Ceretherm buildings. Ceresit ZU mortar is used both for fixing foamed polystyrene boards and for making a reinforced protective layer when insulating newly erected buildings as well as those undergoing thermorenovation. Please speak to one of our friendly staff on 02038839057 Buy yours with us today at www.insulationbee.co.uk

Ceresit CX 10 Ceresit CX 10 successfully enables fixing and gluing of materials such as cellular concrete blocks, wood, OSB boards, plasterboards, foamed polystyrene elements, bituminous coatings, glass, galvanized sheet, polyester coated sheet and others. CX 10 successfully replaces traditional cement masonry mortars when making partition walls. It does not require the use of electricity, water or specialized equipment. At the same time, it has much better thermal insulation properties than traditional cement mortars. The adhesive is ready for use immediately after shaking the contents of the can. Ceresit CX 10 provides a precise and strong connection after just 2 hours. It guarantees work at temperatures from + 5 ° C and high humidity. Ceresit CX 10 can be used indoors and outdoors, both on horizontal and vertical surfaces. Please speak to one of our friendly staff on 02038839057 Buy yours with us today at www.insulationbee.co.uk

Ceresit CT 87 mortar Ceresit CT 87 mortar is used for insulating external walls of buildings by the light-wet method with the use of foamed polystyrene boards or facade panels made of mineral wool. It is a component of jointless insulation systems for external walls of Ceresit Ceretherm buildings. CT 87 mortar is used to make a protective reinforced layer when insulating newly erected buildings as well as those undergoing thermorenovation, and to fix facade thermal insulation boards. Ceresit CT 87 is additionally reinforced with fibers, and thus even more resistant to scratches and cracks. The use of CT 87 (color, surface and organic modifiers) allows it to skip the process of preparing its surface by priming with primers before applying any Ceresit plasters. The content of special light fillers gives the mortar a more plastic, light and homogeneous consistency, it is easier to mix, apply and spread, while increasing the mortar efficiency. Please speak to one of our friendly staff...

Ceresit CT 85 mortar Ceresit CT 85 mortar is used for insulating external walls of buildings using the light-wet method using foamed polystyrene boards. It is a component of the complex thermal insulation system (ETICS) of external walls of Ceresit Ceretherm buildings. CT 85 mortar is used both for fixing foamed polystyrene boards and for making a reinforced protective layer when insulating newly erected buildings as well as those undergoing thermorenovation. Ceresit CT 85 through the use of a specially selected combination of fibers increases the resistance of the insulation system to mechanical damage and resistance to cracking. Please speak to one of our friendly staff on 02038839057 Buy yours with us today at www.insulationbee.co.uk

Ceresit CT 84 polyurethane adhesive Ceresit CT 84 polyurethane adhesive is used for fixing expanded polystyrene boards in complex Ceresit Ceretherm systems for insulation of external walls of buildings (ETICS). Ceresit CT 84 is used for fixing foamed polystyrene boards when insulating newly erected buildings as well as those undergoing thermorenovation. After approx. 2 hours since application, foamed polystyrene boards can be sanded, doweled, and then made with a mesh reinforced layer using Ceresit CT 85, CT 87 or ZU mortar. Ceresit CT 84 polyurethane adhesive is also used for fixing materials such as EPS and XPS foam and hard mineral wool to substrates such as: wood, OSB, glass, bitumen, ceramic brick, concrete, coated and galvanized sheet, dry cellular concrete and after exposure to water, gypsum plasterboard and for layered bonding of foamed polystyrene boards and mineral wool under normal and reduced temperatures, also in thermal insulation systems. Please speak to one of our f...

Ceresit CT 83 Ceresit CT 83 mortar is used for gluing foamed polystyrene boards as part of a complex insulation system for external walls of buildings (ETICS) by the light-wet method in Ceresit Ceretherm systems. It is suitable for both newly constructed and thermally renovated buildings. The boards glued with mortar require additional fixing with mechanical connectors, i.e. with appropriate plastic expansion pins. To make a layer reinforced with fiberglass mesh on foamed polystyrene boards, Ceresit CT 85 or CT 87 mortar should be used. In case of insulation of walls with mineral wool facade panels, Ceresit CT 190, CT 180 or CT 87 mortar should be used. highly adhesive to mineral substrates and polystyrene very good working parameters resistant to weather conditions the possibility of machine application Please speak to one of our friendly staff on 02038839057 Buy yours with us today at www.insulationbee.co.uk

CEKOL TERMO W2 CEKOL TERMO W2 is applied to embed the grid of the fiberglass to the thermal insulation made of mineral wool, inside and outside the facilities. It shows high adhesion to the surface and is resistant to scratches and cracks due to contained fibres. The mortar is an excellent grounding for precious plasters in the external facilities heating system of the external facilities walls. CEKOL TERMO W2 is part of the heating system CEKOL TERMO W. Please speak to one of our friendly staff on 02038839057 Buy yours with us today at www.insulationbee.co.uk

CEKOL TERMO S1 CEKOL TERMO S1 is applied to the thermal insulation of polystyrene to the mineral surface, inside and outside the facilities and is part of the heating system CEKOL TERMO S. Please speak to one of our friendly staff on 02038839057 Buy yours with us today at www.insulationbee.co.uk

ANT Thermo Pro  ANT Thermo Pro is a universal adhesive for fixing EPS-boards and reinforcing layer is used for adhering thermal insulation boards made of expanded polystyrene to mineral substrates internal and external. It is also used for reinforcing fibreglass mesh onto thermal insulation boards made. It has high adhesion to the substrate and contains water repellents. Reinforced with fibre, it is more resistant to damage. Please speak to one of our friendly staff on 02038839057 Buy yours with us today at www.insulationbee.co.uk

Glastatex wallpaper adhesive  Glastatex wallpaper adhesive is a ready-to-use adhesive for fiberglass and interlining wallpapers. The product can also be used for gluing heavy, vinyl, textile and structural wallpapers. Glastatex guarantees professional, durable and very strong bonding of wallpaper to the wall, which powder adhesives cannot provide. The joint after drying is transparent. Always read the wallpaper manufacturer’s instructions before applying the adhesive. Please speak to one of our friendly staff on 02038839057 Buy yours with us today at www.insulationbee.co.uk

 Ceresit CX 10 Ceresit CX 10 successfully enables fixing and gluing of materials such as cellular concrete blocks, wood, OSB boards, plasterboards, foamed polystyrene elements, bituminous coatings, glass, galvanized sheet, polyester coated sheet and others. CX 10 successfully replaces traditional cement masonry mortars when making partition walls. It does not require the use of electricity, water or specialized equipment. At the same time, it has much better thermal insulation properties than traditional cement mortars. The adhesive is ready for use immediately after shaking the contents of the can. Ceresit CX 10 provides a precise and strong connection after just 2 hours. It guarantees work at temperatures from + 5 ° C and high humidity. Ceresit CX 10 can be used indoors and outdoors, both on horizontal and vertical surfaces. Please speak to one of our friendly staff on 02038839057 Buy yours with us today at www.insulationbee.co.uk

Ceresit CT 84  Ceresit CT 84 polyurethane adhesive is used for fixing expanded polystyrene boards in complex Ceresit Ceretherm systems for insulation of external walls of buildings (ETICS). Ceresit CT 84 is used for fixing foamed polystyrene boards when insulating newly erected buildings as well as those undergoing thermorenovation.  After approx. 2 hours since application, foamed polystyrene boards can be sanded, doweled, and then made with a mesh reinforced layer using Ceresit CT 85, CT 87 or ZU mortar. Ceresit CT 84 polyurethane adhesive is also used for fixing materials such as EPS and XPS foam and hard mineral wool to substrates such as: wood, OSB, glass, bitumen, ceramic brick, concrete, coated and galvanized sheet, dry cellular concrete and after exposure to water, gypsum plasterboard and for layered bonding of foamed polystyrene boards and mineral wool under normal and reduced temperatures, also in thermal insulation systems. Please speak to one of our friendly sta...

WIM Strong WIM Strong is a one-component, solvent-free, ready-to-use flexible adhesive and sealant based on a hybrid polymer with a neutral curing system. It has high resistance to changing weather conditions, high and low temperatures, and UV radiation. It is also resistant to aging and the formation of fungi and mold. Recommended for gluing and sealing WIM Platte building panels (with XPS extruded polystyrene core covered with cement mortar and reinforced with mesh) Recommended for gluing and sealing joints between WIM Platte shower tray and wall, cement floor For waterproof gluing and sealing joints of mat edges and sealing tapes with non-woven polypropylene For assembly, gluing and sealing of elements made of various materials such as ceramic tiles, natural stone, wood, glass, metal, plastics, polystyrene Excellent adhesion to most materials and substrates used in construction such as cement mortars, aluminum, extruded polystyrene (XPS), ABS, steel Ideal for sealing lightly moiste...

Primacol Glastatex Primacol Glastatex is a ready-to-use adhesive for fiberglass and interlining wallpapers. The product can also be used for gluing heavy, vinyl, textile and structural wallpapers. Glastatex guarantees professional, durable and very strong bonding of wallpaper to the wall, which powder adhesives cannot provide. The joint after drying is transparent. Always read the wallpaper manufacturer’s instructions before applying the adhesive. How to use: The glue should be mixed thoroughly before use. Apply the product to the wall with a paint roller or brush. Pay attention to the even distribution of the adhesive on the wall. Wallpapering should be done with stripes, i.e. apply glue to a part of the wall about 1.5 m wide, glue the wallpaper strip, align and press, push any air bubbles off the edge of the wallpaper using a rubber roller or cloth. Apply glue to another part of the wall and glue another strip of wallpaper. This way of wallpapering is related to the fast setting of ...

Ceresit CX 10 Ceresit CX 10 successfully enables fixing and gluing of materials such as cellular concrete blocks, wood, OSB boards, plasterboards, foamed polystyrene elements, bituminous coatings, glass, galvanised sheet, polyester coated sheet and others. CX 10 successfully replaces traditional cement masonry mortars when making partition walls. It does not require the use of electricity, water or specialised equipment. At the same time, it has much better thermal insulation properties than traditional cement mortars. The adhesive is ready for use immediately after shaking the contents of the can. Ceresit CX 10 provides a precise and strong connection after just 2 hours. It guarantees work at temperatures from + 5 ° C and high humidity. Ceresit CX 10 can be used indoors and outdoors, both on horizontal and vertical surfaces. replaces traditional glues and cement mortars ready to use does not require the use of electrical equipment, water or specialized equipment highly efficient (up...

 Ceresit CM 12 Plus Ceresit CM 12 Plus adhesive mortar is designed for laying gres and other ceramic, cement and natural stone tiles (discoloration-proof), indoors and outdoors. Ceresit CM 12 mortar can be used in areas exposed to water penetration and on heated floors. As a medium-bed mortar, CM 12 can be applied to repair and level surfaces with depressions of up to 8 mm before laying tiles. Flexible floor adhesive with plastic consistency Excellent working parameters+D1 For wet areas For underfloor heating For heavy traffic areas On non-deforming and sealed substrates For indoor or outdoor For ceramic and gres tiles Please speak to one of our friendly staff on 02038839057 Buy yours with us today at www.insulationbee.co.uk

Ceresit CM 12 Ceresit CM 12 adhesive mortar is designed for laying gres and other ceramic, cement and natural stone tiles (discoloration-proof), indoors and outdoors. Ceresit CM 12 mortar can be used in areas exposed to water penetration and on heated floors. As a medium-bed mortar, CM 12 can be applied to repair and level surfaces with depressions of up to 8 mm before laying tiles. Walkable and groutable after 3 hours For indoor and outdoor For ceramic and gres tiles up to 80 cm on one side Please speak to one of our friendly staff on 02038839057 Buy yours with us today at www.insulationbee.co.uk

CEKOL C-14 CEKOL C-14 is used for glueing of marble and stone panels to bricks, concrete, gas concrete, ceramsit blocks, cement and cement-lime plasters. CEKOL C-14 is also suitable for glueing of ceramic tiles. CEKOL C-14 is a dry mixture of high quality white cement, white mineral fillers and modifying substances ensuring good adhesion and dripping resistance. It may be used in every kind of living and public buildings. CEKOL C-14 is an elastic, frost and water resistant as well as heating resistant tile adhesive for use inside and outside buildings. consumption: about 1.7 kg/m2 for 1 mm layer thickness  layer thickness: 3 to 5 mm setting time for walking and pointing: about 24 hours at the temperature of 18C Please speak to one of our friendly staff on 02038839057 Buy yours with us today at www.insulationbee.co.uk

CEKOL C-11  CEKOL C-11 is used for of grit, ceramic, stone and glass tiles as well as mineral wool to concrete, bricks, gas concrete, ceramsit blocks, gypsum panels and blocks, stable wood bases and steel structures. The CEKOL C-11 is suitable for glueing new tiles on the old ones without chipping them off. It may also be used for warmed-up surfaces, surface smoothing and stopping. CEKOL C-11 is a highly elastic frost and water resistant as well as heating resistant adhesive plaster for use inside and outside buildings. It is a productive, practical, easy to use and non-toxic product in application and use. CEKOL C-11 may be used in living accommodations and public buildings (e.g. nurseries, infant schools, hospitals, restaurants, stores, refrigerated compartments etc.). consumption: about 3 kg/m2 when float with 6 mm teeth is used layer thickness: 3 to 5 mm setting time for walking and pointing: about 24 hours at the temperature of 18oC Please speak to one of our friendly staff o...