Skip to main content

Buy Dulux Once Eggshell

By

Dulux Once Eggshell


Dulux Once Eggshell has been specially formulated to give a perfect low sheen finish on interior and primed or painted wood or metal surfaces in just one coat. It does not require an undercoat. Dulux Once is also available in Emulsion, Gloss and Satinwood.


Apply using a clean, good quality brush. Apply a thick even coat of paint taking care not to spread it too far. Failure to do so may require a second coat, particularly when painting over a darker colour with a lighter topcoat. Leave a minimum of 16 hours between coats.


  • Finish: Eggshell

  • Coverage: Up to 30m2 / litre

  • Drying Time: 6 hours

  • Coats: 1

  • One coat

  • No undercoat required


Step 1: Scrape: remove flaking or defective paint and sand down the surface to remove any sheen. Clean- make sure the surface is clean (no dirt or grease) and dry. Seal: if a bare surface, apply the appropriate Dulux Primer. Treat any knots in wood with suitable knotting solution. If the surface is damaged, repair using the appropriate Polycell product.


Step 2: For best results, scrape off excess paint from the brush and clean with Polycell Brush Cleaner.


Step 3: Store paint in dry conditions and protect from extreme temperatures


Please speak to one of our friendly staff on 02038839057

Buy yours with us today at www.insulationbee.co.uk


Labels:

Comments

Post a Comment

Popular posts from this blog

Buy Ceresit CT 84 polyurethane adhesive

By
Ceresit CT 84 polyurethane adhesive Ceresit CT 84 polyurethane adhesive is used for fixing expanded polystyrene boards in complex Ceresit Ceretherm systems for insulation of external walls of buildings (ETICS). Ceresit CT 84 is used for fixing foamed polystyrene boards when insulating newly erected buildings as well as those undergoing thermorenovation. After approx. 2 hours since application, foamed polystyrene boards can be sanded, doweled, and then made with a mesh reinforced layer using Ceresit CT 85, CT 87 or ZU mortar. Ceresit CT 84 polyurethane adhesive is also used for fixing materials such as EPS and XPS foam and hard mineral wool to substrates such as: wood, OSB, glass, bitumen, ceramic brick, concrete, coated and galvanized sheet, dry cellular concrete and after exposure to water, gypsum plasterboard and for layered bonding of foamed polystyrene boards and mineral wool under normal and reduced temperatures, also in thermal insulation systems. Please speak to one of our f
Post a Comment
Read more

How to Reduce Noise Using Underlay

By
    Sound can travel through liquids, solids or gases making it one of the biggest nuisances for every home. Underlay can reduce acoustic noises, underlay reduces sound from travelling from one place to another. Underlay also dramatically improves sound and heat insulation, underlay can help cut your energy bills helping reduce costs and provide comfort to your home, it’s the best investment you can make long term for your home.   How Can Underlay Reduce Sound and Loud Noises? There are lots of different materials that can be used for sound reduction, all with their own list of benefits. Some materials that are effective are foam and sponge, used as underlay they can reduce sound waves, you can purchase foam and sponge underlay from us at InsulationBee.co.uk . These materials will protect your flooring above and do a great job at sound reduction.   What is Impact Noise Reduction? Impact noise is sound when two surfaces collide, and it is exactly what underlay is designed fo
Post a Comment
Read more
By
  One of the more common complaints about houses with poor build quality is noise transfer, both from outside sources but in particular between the rooms in the house itself. Poor acoustics is something that could, and should, be considered at the design stage of a project. Sound transmission between homes, is a major problem in the UK which requires serious consideration from both architects and builders. Noise nuisance can be a serious cause of stress, and if not remedied it can affect our health and wellbeing as well as influencing everyday life.   What Does Soundproofing Do? To soundproof a home means to lower the intrusion of external noise, while also insulating it so noise cannot escape the space. In many cases acoustic insulation is used to prevent any noise from outside interfering with the residents within. This could be anything from voices, nearby building works or high levels of traffic noise. It also ensures neighbours and outside parties are not disturbed by the
Post a Comment
Read more