Skip to main content

Buy Ceresit CM 16 Express

By

 CM 16 Express

CM 16 Express mortar is particularly useful during renovation works and when it is important to put the premises into operation quickly. The mortar allows foot traffic and pointing after just 3 hours from the moment the facing is glued.

CM 16 Express is used for fixing ceramic tiles (glaze, terracotta, gres), cement and natural stone (resistant to discoloration) on substrates such as: concrete, cement screed, cement and cement-lime plaster, and heated floors. It works well in places exposed to intense traffic and utility loads, such as: communication routes, corridors, schools, supermarkets, shops, restaurants, etc.

It can be used inside and outside buildings, in housing and general construction. Also (only inside buildings) on gypsum, anhydrite, aerated concrete substrates, strong paint coatings, existing tiles, cellular concrete. In the case of fixing tiles made of stone sensitive to discoloration, it is absolutely necessary to carry out own application tests to check whether the mortar does not discolor the tiles.

In the case of other types of tiles and other substrates, higher loads – appropriate Ceresit mortars and adhesives should be used.


  • foot traffic and grouting possible after 3 hours

  • thick layer up to 20mm

  • for balconies, terraces, underfloor heating

  • for difficult substrates: OSB, tile to tile

  • with non-shrinkage drying and bonding

  • enables fast progress of tiling works

  • recommended for large and small tiles

  • full load after 24 hours


Please speak to one of our friendly staff on 02038839057

Buy yours with us today at www.insulationbee.co.uk

Labels:

Comments

Post a Comment

Popular posts from this blog

Buy Ceresit CT 84 polyurethane adhesive

By
Ceresit CT 84 polyurethane adhesive Ceresit CT 84 polyurethane adhesive is used for fixing expanded polystyrene boards in complex Ceresit Ceretherm systems for insulation of external walls of buildings (ETICS). Ceresit CT 84 is used for fixing foamed polystyrene boards when insulating newly erected buildings as well as those undergoing thermorenovation. After approx. 2 hours since application, foamed polystyrene boards can be sanded, doweled, and then made with a mesh reinforced layer using Ceresit CT 85, CT 87 or ZU mortar. Ceresit CT 84 polyurethane adhesive is also used for fixing materials such as EPS and XPS foam and hard mineral wool to substrates such as: wood, OSB, glass, bitumen, ceramic brick, concrete, coated and galvanized sheet, dry cellular concrete and after exposure to water, gypsum plasterboard and for layered bonding of foamed polystyrene boards and mineral wool under normal and reduced temperatures, also in thermal insulation systems. Please speak to one of our f...
Post a Comment
Read more

How to Reduce Noise Using Underlay

By
    Sound can travel through liquids, solids or gases making it one of the biggest nuisances for every home. Underlay can reduce acoustic noises, underlay reduces sound from travelling from one place to another. Underlay also dramatically improves sound and heat insulation, underlay can help cut your energy bills helping reduce costs and provide comfort to your home, it’s the best investment you can make long term for your home.   How Can Underlay Reduce Sound and Loud Noises? There are lots of different materials that can be used for sound reduction, all with their own list of benefits. Some materials that are effective are foam and sponge, used as underlay they can reduce sound waves, you can purchase foam and sponge underlay from us at InsulationBee.co.uk . These materials will protect your flooring above and do a great job at sound reduction.   What is Impact Noise Reduction? Impact noise is sound when two surfaces collide, and it is exactly what unde...
Post a Comment
Read more
By
  One of the more common complaints about houses with poor build quality is noise transfer, both from outside sources but in particular between the rooms in the house itself. Poor acoustics is something that could, and should, be considered at the design stage of a project. Sound transmission between homes, is a major problem in the UK which requires serious consideration from both architects and builders. Noise nuisance can be a serious cause of stress, and if not remedied it can affect our health and wellbeing as well as influencing everyday life.   What Does Soundproofing Do? To soundproof a home means to lower the intrusion of external noise, while also insulating it so noise cannot escape the space. In many cases acoustic insulation is used to prevent any noise from outside interfering with the residents within. This could be anything from voices, nearby building works or high lev...
Post a Comment
Read more