Insulationbee ltd Shop! Buy your insulation materials online

 EJOT – PLASTIC PIN HAMMER FIXING Width: 235mm, 75mm, 95mm, 155mm, 195mm, 215mm, 115mm, 135mm, 175mm Approved for concrete, solid and perforated masonry Precise installation with self-levelling washer Flexible washer assures optimum positioning on insulation surface, even if pilot holes are slightly off-square Glass reinforced pin to reduce thermal transmission Short embedment depths, minimum drill hole depth Universal hammer-in anchor with plastic expansion pin, flexible washer For concrete, solid and perforated masonry (A, B, C) For all insulation boards With European Technical Assessment (ETA) Buy yours with us today at www.insulationbee.co.uk

 EPS Insulation Expanded polystyrene EPS insulation board is high-performing thermal insulation at the centre of our external wall insulation systems. It upgrades the thermal properties of a building, improving U-values, reducing the risk of water penetration and condensation. EPS boards can be used on timber, masonry and system-built properties as well as for tile hanging and a wide range of rendering systems. It is designed to be applied externally to masonry or timber-backed walls using adhesive and mechanical fixings. EPS boards can also be installed in the cavity void if the property is being insulated using cavity wall insulation.   Composition: expanded polystyrene, graphite Thermal Conductivity: 0.032W/(m2K) Reaction to Fire: Class E Compressive strength: 70kPa R-value: 1.97W/(m2K) Weight: 13.02kg Weight/m2: 1.13kg Size of boards: 1200 x 600mm Thicknesses available: 20mm, 30mm, 50mm, 70mm, 90mm, 100mm, 150mm and 200mm Coverage in pack: 0.72m2 Bending strength: >= ...

 Kingspan K5 External Wall Insulation Board Kingspan Kooltherm K5 external wall board is a premium phenolic insulation board for external wall insulation systems. The insulation boards have a rigid phenolic core, which offers excellent thermal capabilities, and is ideal for use with our thin coat renders to create a highly effective insulation system.   Kingspan K5 insulation is made of high-quality phenolic foam. It’s CFC and HCFC free and has an ozone depletion potential of zero. Its environmental impact is therefore very low for a foam insulation material. The boards should be installed using the EWI-225 Premium Basecoat for maximum structural stability, and then finished with a decorative thin coat render such as EWI-075. The result is a superior external insulation system with excellent thermal comfort for end-users.   Composition: phenolic insulation core faced on both sides with glass tissue Thermal Conductivity: 0.020W/(m2K) Reaction to Fire: Class 0 (B) Size of...

 Rockwool External Wall Dual Density Slabs Rockwool External Wall Dual Density Slabs are a premium insulation board composed of mineral wool, which is a very similar material to fibreglass. While fibreglass is made up of thousands of glass fibres, Rockwool is made from molten volcanic rocks. The material is produced by heating the volcanic rock within a large furnace, then spinning it into fibrous strands and compressing it into boards. As a vapour-permeable insulation material, the boards are ideal for use with a breathable thin coat render such as EWI Pro ’s Silicone Render. Rockwool is the insulation material of choice for architects and builders alike. When you choose Rockwool External Wall Dual Density Slabs for your external wall insulation system, you also gain the added benefit of acoustic insulation. The open porous structure of the stone wool means that the boards are able to absorb and reduce the impact of sound, enabling homeowners to enjoy a comfortable, quiet interna...

XPS Insulation Extruded Polystyrene XPS is a modern insulating material with fantastic thermal properties, good moisture resistance and high strength. This extruded polystyrene (XPS) board is a high-density board that can be used for various applications on buildings, including DPC insulation, extending concrete windowsills or providing insulation backing where EPS is not suitable to use. The material has a smooth closed-cell surface ready for use.   These XPS boards can be used on timber, masonry and system build properties, as well as for tile hanging and as the base for a wide range of rendering systems.   Weight: 35kg Thickness: 100mm, 30mm, 50mm Composition: extruded polystyrene, silver boards Long term compression strength (kPa): 130 Thermal Conductivity: 0.034W/(m2K) Size of boards: 1200mm x 600mm Sold by boards (each board is 0.72 squared meters)   Buy yours with us today at www.insulationbee.co.uk

 Wood Fibre Insulation Wood Fibre insulation is a tried and tested insulation material within the UK. It is a highly breathable insulating material, providing an outstanding level of thermal comfort within the home and is therefore perfect for use within an EWI system. Not only does the Pavatex Diffutherm insulation offer superlative insulating properties, but it also has the credential of being an environmentally friendly material. Due to its unparalleled breathability, Wood Fibre Insulation is perfect when used for a timber-framed property because it is a vapour-open building material. It’s essential for a building to be able to breathe in order to prevent damp and maintain structural integrity. The Wood Fibre Insulation will regulate the passage of water through the building structure, allowing for the diffusion of moisture and preventing any detrimental moisture build-up within the property and the EWI system. When used in conjunction with our highly breathable silicone rende...

 EWI-220 EPS Basecoat EPS Basecoat is a cement based adhesive. It is manufactured from a mixture of Portland cement, texturing aggregate, mineral fillers and hydrated lime. The grey cement based basecoat is used to embed in the fibreglass mesh as part of the reinforcement layer on polystyrene (EPS) thermal insulation systems. EPS basecoat can also be used as a bedding adhesive to stick EPS boards to a substrate.  The EPS Basecoat is highly durable, elastic, quick drying and has excellent frost resistance properties. EPS Basecoat should be stored correctly to ensure the product performs consistently throughout the application process. The presence of polymer-modified binders within the adhesive deliver strong adhesion, better flexibility, higher crack resistance and improved durability Weight:  25kg Buy yours with us today at www.insulationbee.co.uk

   EWI-210 EPS Adhesive EPS Adhesive is a cement based adhesive, manufactured from a mixture of Portland cement, texturing aggregate, mineral fillers and hydrated lime. This bedding adhesive is used to stick the EPS boards to the substrate and is suitable for application all year round. The EPS Adhesive is highly durable, quick drying and has excellent frost resistance properties. EPS Adhesive should be stored correctly to ensure the product performs consistently throughout the application process. The product also contains reinforcing fibres which provide additional strength and flexibility. EPS Adhesive is used to adhere EPS boards to prepared substrates. The underlying masonry substrate should be clean, free from paint, dust and any vegetation build-up.  Weight: 25kg Composition: mineral binding agents, mineral fillers, modifying additives Bulk density (dry mixture): about 1.40 g/cm³ Adhesion to concrete (air-dry): ≥ 0.3 MPa  Adhesion to polystyrene: ≥ 0.08 MPa ...

EWI-221 Winter Adhesive EWI-221 Winter Adhesive can be used both within the reinforcement layer and for fixing EPS insulation boards to substrates much like EWI-220. The major difference is that this winter adhesive can be used even when the external temperature is very low – in fact, it allows the external wall insulation systems to be installed down to temperatures as low as 0 degrees. The Winter adhesive is cement based, manufactured from a mixture of white Portland cement, mineral fillers and microfibres. Much like our other adhesives, the adhesive can be used as both a bedding adhesive for EPS insulation systems, and as a basecoat adhesive on EPS systems once a fibreglass mesh has been embedded within it. The key difference is that the Winter Adhesive can be used at temperatures down to zero degrees, making it perfect for cold weather installations. It is highly durable, elastic and quick drying, offering long-lasting performance that will stand the test of time. Weight: 25kg Bu...

 EWI-210 EPS Adhesive EPS Adhesive is a cement based adhesive, manufactured from a mixture of Portland cement, texturing aggregate, mineral fillers and hydrated lime. This bedding adhesive is used to stick the EPS boards to the substrate and is suitable for application all year round. The EPS Adhesive is highly durable, quick drying and has excellent frost resistance properties. EPS Adhesive should be stored correctly to ensure the product performs consistently throughout the application process. The product also contains reinforcing fibres which provide additional strength and flexibility. The EPS Adhesive comes in powder form in 25kg bags. It is therefore a dry mix and needs to be combined with clean, cold water (6.3 litres) prior to use. We suggest using a large bucket and adding the water prior to the EPS Adhesive. Once the EPS Adhesive has been added to the water, mix the product using a paddle mix until an even-consistency mortar is produced. Weight: 25kg Buy yours online a...

 EWI Winter Adhesive The Winter adhesive is cement based, manufactured from a mixture of white Portland cement, mineral fillers and microfibres. Much like our other adhesives, the adhesive can be used as both a bedding adhesive for EPS insulation systems, and as a basecoat adhesive on EPS systems once a fibreglass mesh has been embedded within it. The key difference is that the Winter Adhesive can be used at temperatures down to zero degrees, making it perfect for cold weather installations. It is highly durable, elastic and quick drying, offering long-lasting performance that will stand the test of time. Weight: 25kg Buy yours today at  www.insulationbee.co.uk

  EVERBUILD CONSTRUCTA-PRO FOAM ADHESIVE EVERBUILD® Constructa-Pro is a high strength adhesive foam designed for use in a multitude of building applications. EVERBUILD® Constructa-Pro adheres well to most common building materials including stone, concrete blocks, brick, wood, plasterboard, insulation board, metal and much more! Once cured, it’s also rot-proof, and moisture and temperature resistant from -40°C to +80°C.  Colour: grey Pack size: 750ml Multipurpose adhesive foam Temperature resistant from -40°C to +80°C Buy yours with us today at www.insulationbee.co.uk

 Everbuild Gun grade Expanding Foam Gun Grade Expanding Foam is a quick setting polyurethane-based foam which expands greatly on application and yields up to 50 times original can contents. It fills irregular gaps, fixes framework, insulates and sound deadens. Gun Grade Expanding Foam is designed for professional use in conjunction with Gun Foam Applicators. Quick setting – can be cut, sawn or plastered in 1 hour Fills irregular and broad gaps where most conventional fillers would fail Possesses insulating and sound deadening properties Designed for professional use in conjunction with Gun Foam Applicators Buy yours with us today at www.insulationbee.co.uk

 EWI-330 Mineral Acrylic Primer The EWI-330 Mineral Acrylic Primer is a deep-penetrating primer, designed for final preparation of surfaces prior to applying EWI Pro mineral, acrylic and mosaic renders. It strengthens the substrate and limits and balances its absorptive capacity without compromising breathability. It facilitates rendering plaster coats and enhances their adhesion to substrates, helping to ensure a long lasting finish. EWI-330 can be pigmented to match the colour of the render and comes as a ready-to-use mixture in 7kg and 21kg plastic tubs. Weight: 21kg Buy yours today at www.insulationbee.co.uk

 EWI-075 Silicone Render Silicone Render is the most popular render in the EWI Pro range. The render will form a long lasting, aesthetically pleasing protective barrier on the external surface of any building. Silicone Render is very flexible, highly breathable and resistant to mechanical impact and UV rays. It is throughcoloured and can be tinted to cover an extensive range of colours. This decorative render is ideal for external rendering works and once it has set firm, has excellent water and frost resistance. Silicone Render is hydrophobic, self-cleaning and has a resistance to biological growth, meaning that once installed it requires minimal aftercare. Weight: 25kg Grain Size: 0.5mm, 1.0mm, 1.5mm, 2.0mm, 3.00mm Colour: Acorn, Bone, Clay, Cloud, Concrete, Diamond, Fog, Frost, Haze, Lead, Mirror, Paraffin, Prosecco, Sage Green, Storm, Truffle, Almond, Antique White, Ash, Copenhagen, Eggshell, Elderflower, Ice, Ivory, Linen, Magnolia, Mist, Opal, Orchid, Platinum, Porcelain, P...

 EWI-010 Acrylic Render Acrylic Render is the best value render in the EWI Pro system range. The render will form a long lasting, aesthetically-pleasing protective barrier on the external surface of any building. Acrylic render is flexible and highly resistant to mechanical impact. It is also particularly good at holding vibrant colours, and can be mixed to almost any shade. This decorative render is ideal for external rendering works and once it has set firm, has excellent water and frost resistance.  EWI-010 Acrylic Render can be easily applied by hand or sprayed onto a substrate. When applying Acrylic Render, use a notched trowel to apply the render to a thickness which corresponds with the grain size. Ensure that you have enough workers on-site to be able to apply the render to whole sections of a wall (rather than half sections) to prevent scarring where the sections meet.  To create an even, textured finish we recommend that you rub up against the surface of the r...

 EWI-040 Silicone Silicate Silicone Silicate Render is the best value silicone enhanced render on the market in the UK. The render will form a long lasting, aesthetically-pleasing protective barrier on the external surface of any building. Silicone Silicate Render is very flexible, highly breathable and resistant to mechanical impact and UV rays. It is through-coloured and can be tinted to cover an extensive range of colours. This decorative render is ideal for external rendering works and once it has set firm, has excellent water and frost resistance. Silicone Silicate Render is hydrophobic, therefore has self-cleaning properties. Silicone Silicate Render is a decorative, thin-coat render and is available in either 1.0mm, 1.5mm, 2.0mm and 3.0mm grain sizes. It is suitable for interior or exterior surfaces but works best when applied on top of a reinforcement layer as part of our thin-coat render or insulation systems. Weight 25 kg Grain Size: 1.5mm Colour Acorn, Bone, Clay, Clou...

 EWI-050 Mosaic Render Mosaic Render is a highly durable render, which makes it ideal for exposed surfaces prone to damage and soiling (for example the DPC area). EWI-050 Mosaic Render is a ready to use decorative render. It is made up coloured quartz aggregate, held within a transparent acrylic resin binder. Another key advantage of Mosaic Render is how easy it is to maintain. The finished render façade can be scrubbed and cleaned without discolouration or loss of mechanical durability. It is available in white, black or grey – with a quartz aggregate grain size of 1.8mm. EWI-050 Mosaic Render is designed for application by hand or by mechanical action (using spray equipment for granular texture) to achieve decorative mosaic render coats on concrete substrates, mineral undercoats, gypsum plasterboards & fibreboards as well as reinforcement layers in EPS thermal wall insulation systems offered by EWI Pro external wall insulation systems. Weight 25 kg Colour: Black, Grey, Whit...

 EWI-210 EPS Adhesive EPS Adhesive is a cement based adhesive, manufactured from a mixture of Portland cement, texturing aggregate, mineral fillers and hydrated lime. This bedding adhesive is used to stick the EPS boards to the substrate and is suitable for application all year round. The EPS Adhesive is highly durable, quick drying and has excellent frost resistance properties. EPS Adhesive should be stored correctly to ensure the product performs consistently throughout the application process. The product also contains reinforcing fibres which provide additional strength and flexibility. EPS Adhesive is used to adhere EPS boards to prepared substrates. The underlying masonry substrate should be clean, free from paint, dust and any vegetation build-up.  Weight: 25kg Composition: mineral binding agents, mineral fillers, modifying additives Bulk density (dry mixture): about 1.40 g/cm³ Adhesion to concrete (air-dry): ≥ 0.3 MPa  Adhesion to polystyrene: ≥ 0.08 MPa (ruptur...

  EWI-005 SILICONE PAINT EWI-005 is a ready-to-use Silicone paint , specifically designed for professional use, based on silicone resin emulsion and a combination of acrylic binding agents. It is easy to apply and provides a water-proof and highly breathable, protective layer – it is also resistant to environmental pollutants. Silicone paint is suitable for interior and exterior surfaces. Silicone paint is also available in 2500 different colours, and in both 5 and 15 litre tubs. EWI-005 Silicone Paint (Colour Equalisation Paint) is designed for application on skim-coat mineral plaster surfaces. Depending on weather conditions, the product should be applied 3-7 days after the mineral render has been applied to the substrate – this will ensure proper physical and chemical bonding between the plaster coat and colour equalisation paint. Weight 7 kg Colour Acorn, Bone, Clay, Cloud, Concrete, Diamond, Fog, Frost, Haze, Lead, Mirror, Paraffin, Prosecco, Sage Green, Storm, Truffle, Almon...

 Actis Hybris Honeycomb Insulation HYBRIS is an innovative insulation material for timber frame or masonry walls, pitched roofs, ceiling and suspended timber floor applications. HYBRIS is a reflective insulation product based on a honeycomb structure made of shaped polyethylene foams glued to aluminium coated polyethylene foils. Its high thermal performance is provided by a special structure composed of a large number of low emissivity cavities, protected from dust and excessive air movement. Moreover, the low emissivity external fllms provide additional thermal resistance, when associated with air cavities. HYBRIS is available in panels of 1145mm x 1200mm and in a range of thicknesses from 50mm to 205mm.   HYBRIS is easily installed between rafters, timber studs or within floor joists. It accurately fts all widths, held in place by compression. Hybris is also durable and doesn’t slump down over time. HYBRIS is light weight, less than 9.5kg/m3 , thus easy to store and transp...

  Xtratherm XtroLiner Insulation For Pitched Roof Xtratherm XtroLiner is a superior performance insulation with a lambda value of 0.021 Wm/K. It is faced with a robust PIR aluminium foil and is available with engineered jointing to deliver improved Thermal Bridging detailing. XO/PR on sloped roofs (ventilated, hybrid or warm) provides the most efficient U-values with minimal intrusion into valuable living space. The roof construction is a critical element in the building fabric and is an area at high risk of heat loss. Using XO/PR will reduce heat loss while also delivering excellent thermal bridging details. Warm Roof Construction is a particularly effective way of insulating complex roofs. Insulating above – or above and between – the roof timbers ensures that the structure is kept at or near the internal environment conditions, reducing thermal stress and condensation risk. This product has a Euroclass C Fire Classification. Thickness:  100mm All Thickness:  25,30,40,...